Waco 6013 Digital Capacitance Meter: 200pF to 20,000µF Range

The Waco 6013 Digital Capacitance Meter is a precise instrument designed to measure capacitance values ranging from 200 picofarads (pF) to 20,000 microfarads (µF). Its user-friendly interface and accurate measurements make it suitable for both professionals and hobbyists working with electronic components.

Key Features:

• Wide Measurement Range: Covers capacitance measurements from 200pF to 20,000µF, accommodating a broad spectrum of capacitors.
• High Accuracy: Provides precise readings with an accuracy of ±0.5% for ranges up to 200µF, ±1.0% for the 2000µF range, and ±2.0% for the 20,000µF range.
• LCD Display: Features a 3½-digit LCD with a maximum display of 1999 counts, ensuring clear visibility of measurements.
• Zero Adjustment: Equipped with an external zero adjuster to offset any residual capacitance, enhancing measurement accuracy.
• Overrange Indication: Displays '1' to indicate when the measured capacitance exceeds the selected range.
• Compact Design: Lightweight and portable, making it convenient for on-site measurements and easy storage.

Specifications:

• Measurement Ranges and Accuracy:
  • 200pF: ±0.5% of full scale ±1 digit
  • 2nF: ±0.5% of full scale ±1 digit
  • 20nF: ±0.5% of full scale ±1 digit
  • 200nF: ±0.5% of full scale ±1 digit
  • 2µF: ±0.5% of full scale ±1 digit
  • 20µF: ±0.5% of full scale ±1 digit
  • 200µF: ±0.5% of full scale ±1 digit
  • 2000µF: ±1.0% of full scale ±1 digit
  • 20,000µF: ±2.0% of full scale ±2 digits
• Test Frequency:
  • 800Hz for ranges up to 2µF
  • 80Hz for 20µF range
  • 8Hz for ranges 200µF and above
• Power Supply: 9V battery (NEDA1604 or 6F22 006P)
• Dimensions: Approximately 31.5mm (H) x 91mm (W) x 189mm (L)
• Weight: Approximately 240g (including battery)

Usage Instructions:

1. Power On: Insert a 9V battery into the compartment and turn on the meter.
2. Range Selection: Use the rotary switch to select the appropriate measurement range based on the expected capacitance value.
3. Zero Adjustment: For ranges 200pF, 2nF, and 20nF, adjust the zero using the external zero adjuster after connecting the test leads but before measuring the capacitor.
4. Measurement: Connect the capacitor to the input jacks using the provided test leads or directly insert it into the measuring socket. Ensure the capacitor is fully discharged before measurement.
5. Reading: Observe the capacitance value displayed on the LCD. If '1' is displayed, the capacitance exceeds the selected range; switch to a higher range if necessary.

Safety Precautions:

• Always discharge capacitors fully before measurement to prevent damage to the meter.
• Do not apply any voltage to the input jacks during measurement.
• Observe correct polarity when measuring polarized capacitors.